Digital Matrix PA Solution

Product Details:

4 Channel Class D Power Amplifier (4 x 125W) with built in loudspeaker processing DSP, capabale of acting as a stand alone mixing amplifier  with following features:- 4 line input through combo connectors (TRS jack or XLR)- 4 output channel each with dedicated 4 ohm/ 8ohm/ 70V/ 100V output- Environmentally friendly auto standby mode, - Ethernet connectivity for PC GUI based configuration & control.- Wireless control by  iOS devices like iPhone or iPad- RJ45 connection to DSP mixer (Amp link)DSP Features : Input Mixer, Cross over, 8 band Output EQ, Delay, Dynamic Range Compressor, Output Level mixer, Fault and thermal indication per amplifier channel, THD : 0.1%, Dynamic Range : >101 dB, Crosstalk @ 1 Khz <-70 dBAmplifier channels can be combined to drive a single floating load (bridge), to increase the amount of power available in different speaker loads.

Product Details:

The wall unit shall select & control volume level either the back ground music inputs or the mic/line inputs in specific zone with following features:- Capacitive touch button for Source Selection, LED indication- Capacitive touch button for Volume Control, LED indication- Choice for selection of either 4 Mic / Line Inputs or 3 Nos. Music Sources, - Powered over standard CAT-5 Cable from the Main Controller

Product Details:

8 IN x 8 Out  DSP zone matrix mixer and loudspeaker processor, 4 mic/line input (Combo connctor), 3 music source, call station and emergency inputs with following features:- 8 independent output zones,- RJ45 connection for amplifier connectivity (Amp Link outputs), - Ethernet control and Windows PC GUI, - Wireless Control through iOS devices like iPhone and iPad, - RJ45 connection for call stations and wall control panelsDSP Features : Input gain, Input Dynamic Range Compressor, Input parametric EQ, Cross over upto 8th order, 7 Band Output parametric EQ, Output delay of 120ms per output, Output Dynamic Range Compressor, Zone mute and global system muteFront indicatrors : Phantom power, active, signal/clip, call station audio bus, output signal present, RS485 and Ethernet.